Jb Weld
Previous
Next
Strength
4000 PSI
Set Time
1 Hour
Cure Time
8 Hours
Cure Color
Dark Gray
SKU: 8297
$8.99In stockhttps://jbweld.com/product/highheat-epoxy-putty
HighHeat™ is a hand mixable epoxy putty stick specifically formulated to bond and repair materials that will be exposed to high temperatures in automotive and industrial maintenance applications. It cures to a tough, hard bond with little to no shrinkage. This industrial-strength product outperforms conventional epoxy putties at high temperatures and sets in 1 hour at room temperature. After 8 hours, it can be drilled, tapped, machined, ground, filed and painted. HighHeat™ is rated at a tensile strength of 4000 PSI and cures to a machine grey in color. It is able to withstand continuous heat exposure of 450ºF and intermittent heat exposure to 500ºF.
Great For
- Exhaust Manifolds
- Tail Pipes
- Mufflers
- Engine Blocks
- Duct Work
- Machinery
- High Temperature Projects
Use On
- Automotive
- Metal
- And More
It's Easy To Get
The Fix You Need
1
Cut
2
Mix
3
Apply
2
Mix
Thoroughly knead putty with fingers to a uniform color.
3
Apply
Press putty firmly to the surface to be repaired.
A Few
Similar Products
Strength
Set Time
Cure Time
Cure Color
ExtremeHeat™ Paste - 3 oz
Strength
NA
Set Time
1 Hour
Cure Time
24 Hours
Cure Color
Dark Gray
Quick ViewView Product
SteelStik™ Epoxy Putty - 2 oz
Strength
4000 PSI
Set Time
5 Minutes
Cure Time
1 Hour
Cure Color
Dark Gray
Quick ViewView Product
MufflerSeal Muffler Cement
Strength
NA
Set Time
2- 4 hours
Cure Time
24 hours
Cure Color
Dark Gray
Quick ViewView Product
